LIOO Moving · Packing Guides
How to Pack a TV for Moving (With or Without the Box)
A modern panel is a sheet of glass in a thin frame: it shrugs off a bump but hates pressure on the screen face and twisting at the corners. Everything below follows from those two facts.
Before you unplug 5 minutes of prep
Photograph the back panel with cables attached — reconnecting at the new place takes one look instead of twenty minutes.
Bag the hardware. Stand screws, wall-mount bolts, and remotes go in a labeled zip bag taped to the stand (never to the TV).
Remove the stand and any soundbar. They twist the frame if left on.
Packing it Three good options
Original box + foam: the factory foam holds the corners; nothing beats it.
Flat-panel kit: an adjustable double-wall box with foam corner protectors, sized to the panel. Worth it for anything 55″ and up.
Blanket wrap: a clean moving blanket over the whole panel, stretch-wrapped snug (stretch wrap sticks to itself, not the screen). Add cardboard over the screen face for rigidity. This is how movers carry TVs without boxes every day.
Transport The part people get wrong
Upright, always. Flat on its back, the unsupported center of the glass carries the load on every bump.
Wedged, not loose: between a mattress and a sofa cushion side, or strapped flat against the truck wall over a blanket.
Climate note: after a cold or very hot truck ride, let the TV sit at room temperature an hour before powering on.
When to let a crew handle it
Wall-mounted TVs, 75″+ panels, and stairs are where DIY TV moves go wrong — dismounting alone is a two-person job. LIOO crews blanket-wrap and carry panels as part of any move, and packing service jobs include proper TV boxing. Fragile wall art travels by the same rules — see packing artwork & mirrors.
Tell us what’s fragile — TVs, art, glass — and we’ll plan the wrap, the carry, and the truck position before move day.